MIL-A-17051 - Afterbody Shells, Steel, Welded
This specification covers welded steel afterbody shells for torpedoes.
MIL-A-18977 - Amplifier Channel (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification establishes the requirements for the procurement, inspection and test of an Amplifier Channel, LD 162565, LD 296726, and Drawing 1154877.
MIL-A-19024 - Actuator, For Torpedo Mark 37 Mod O
MIL-A-19342 - Afterbody And Tailcone Sections For Mine Vehicle Mark 1 Mod 1
MIL-A-19422 - Actuator, Elevator, Rudder (For Torpedo Mark 39 Mod 1)
MIL-A-19747 - Afterbody Assembly, Torpedo (For Torpedo Mark 43 Mod 3)
MIL-A-19815 - Arming Device (Unloaded And Loaded) Mark 2 Mods 1 And 3
This specification states the requirements for the procurement of Arming Device Mk 2 Mods 1 and 3 (Unloaded) and the requirements for the loading of Arming Device Mk 2 Mods 1 and 3. Arming Device Mk2 Mods 1 and 3 (Unloaded) perform the final electrical switching and mechanical alignment necessary to arm the exploder and, when loaded, contain the primary explosive train which detonates the torpedo warhead.
MIL-A-21001 - Arming Device Mark 6 Mod O (Torpedo Practice)
This specification governs the manufacture, assembly and preparation for delivery of Arming Device Mark 6 Mod 0 (Torpedo Practice) and the methods of inspection and tests upon which product acceptance will be based. Arming Device Mark 6 Mod 0 (Torpedo Practice) is an assembly adapted for receiving two electroresponsive actuators which are shunted when the arming device is in a disarmed position and electrically connected in a firing circuit when the arming device is in an armed position.
MIL-A-21307 - Amplitude Recording Amplifier (For Torpedo Mk 37 Mod 0)
MIL-A-21461 - Arming Device Mark 3 Mod 3 (Unloaded For Torpedo Explorer Mark 9 Mod 4)
MIL-A-22415 - Actuator
MIL-A-23079 - Actuator (For Torpedo Mark 45 Mods 1 And 2)
MIL-A-23282 - Actuator
This specification, together with BUWEPS LD 495974, establishes the requirements for the procurement of a magnetic particle clutch actuator which supplies course control to Torpedo Mk 37 Mods 0 and 1.
MIL-A-81083 - Alternator Rectifier (For Torpedo Mk 46 Mods O, 1, 2, And 4)
This specification covers one type of brushless alternator-rectifier, refered to herein as the "alternator".
MIL-A-81327 - Acoustic Locating Device Locating (For Torpedo Mk 46 Mod 0)
This specification covers the Acoustic Locating Device, Dwg 2158843 and Dwg 3277485.
MIL-A-82430 - Actuator Assembly (For Torpedo Mk 46 Mod 1)
This specification covers requirements for the procurement of one type of actuator assembly.
MIL-B-17348 - Battery Mk 42 Mod O Secondary Type, Silver-Zinc-Alkali
MIL-B-17471 - Battery Mk 41 Mod 1 Secondary Type, Silver-Zinc-Alkali
MIL-B-18532 - Bulkhead, Steel Alloy (Torpedoes)
MIL-B-19282 - Battery, Mark 55 Mod 0 Secondary Type, Silver-Zinc-Alkali
MIL-B-19745 - Battery Mk 58 Mod 0 Secondary Type, Silver-Zinc-Alkali
MIL-B-19870 - Ballast Section For Negatively Buoyant Exercise Head (For Torpedo Mark 37 Mod 0)
MIL-B-21406 - Bag, Flotation For Exercise Head Mark 65 Mod 0 (Torpedo Mark 16 Mod 6)
MIL-B-21955 - Battery Mk 61 Mod 0
MIL-B-21956 - Battery Mk64 Mod O
MIL-B-22411 - Battery, Storage, Mark 66 Mod 0 Secondary Type, Silver-Zinc-Alkali
MIL-B-22506 - Battery, Recorder (Seawater Activated) Assembly
MIL-B-22849 - Battery Mk 78 Mod 0 Primary Type, Silver-Zinc-Alkali
MIL-B-22850 - Battery Mk 65 Mod 0 Primary Type, Silver-Zinc-Alkali
MIL-B-22876 - Battery, Water Activated, Mark 67 Mod 1
MIL-B-23287 - Battery Section Assembly
This specification establishes the requiremnts for the procurement and test of one type of torpedo battery compartment, BUORD LD-419735.
MIL-B-23860 - Battery Mark 61 Mod 1
MIL-B-81075 - Battery, Sea Water Activated (For Torpedo Mk 46 Mod 0)
MIL-B-81201 - Battery Assembly For Exercise Head, Mark 7 Mod 2 And Exercise Head Kit, Mark 16 Mod 0
MIL-B-82439 - Battery, Sea Water
MIL-C-18976 - Climb Angle Limiter (For Torpedo Mark 21 Mod 2)
MIL-C-19062 - Control Cable Assemblies And Connector Plugs And Receptacles (For Torpedoes)
MIL-C-19087 - Contractors (For Torpedo Mark 37 Mods 0, 2 And 3)
This specification describes the requirements for the manufacture, procurement, inspection, and test of series and paralleling contractors, NAVORD Drawings 877137 and 877138.
MIL-C-19276 - Controller, Steering (For Torpedo Mark 39 Mod 1)
MIL-C-19308 - Converter, Gyro Pickoff (For Torpedo Mark 39 Mod 1)
MIL-C-19316 - Control Unit, Depth (For Torpedo Mark 39 Mod 1)
MIL-C-19765 - Control Panel (For Torpedo Mk 27 Mod 4)
MIL-C-19768 - Control Panel (For Torpedo Mk 34 Mod 1)
MIL-C-19774 - Control Unit, Auxiliary (For Torpedo Mark 27 Mod 4)
MIL-C-21401 - Control Panel, For Torpedo Mk 39 Mod 1
MIL-C-21694 - Control Relay Panel Assembly
MIL-C-22281 - Control Unit (Torpedo Mark 45 Mods 1 And 2)
MIL-C-22315 - Container, Torpedo Mark 197 Mod 0 (S/S By Mil-C-82461)
MIL-C-22316 - Container, Head Section Mark 188 Mod 0
MIL-C-22317 - Container, Torpedo Mark 187 Mod 0 (S/S By Mil-C-23434)
MIL-C-22400 - Circuit Breaker
MIL-C-22770 - Coil, Wire
This specification establishes the requirements for wire coils.
MIL-C-22896 - Contactor
MIL-C-22912 - Controller, Steering (For Torpedo Mark 37 Mod 2)
This specification establishes the requirements for the procurement of a steering controller, LD 539991.
MIL-C-22921 - Control Relay Panel Assembly (Torpedo Mk 44 Mod 1)
MIL-C-23434 - Container, Torpedo, Mark 187 Mod 1
MIL-C-81064 - Course Gyroscope (For Torpedo Mk 46 Mods 0 And 1)
This specification covers one type of Course Gyroscope (ID 541118) for use in a torpedo.
MIL-C-82576 - Cable Assembly, Test (For Torpedo Test Set Mark 281 Mod 1)
This specification covers a 65-conductor test cable assembly for use with the Torpedo Test Set Mark 281 Mod 1. (See 6.1.)
MIL-C-82614 - Cable Assembly, Torpedo Control, Mark 6 Mod 0
This specification covers requirements for the procurement of cutterless Torpedo Control Cable Mk 6 Mod 0, LD 162420. The cable is used with deep depth torpedoes.
MIL-C-82620 - Connector, Torpedo Tube Cable, Mk 47 Mod 0 And Mk 48 Mod 0
This specification establishes the requirements for the procurement of Torpedo Tube Cable Connectors Mk 47 Mod 0 and Mk 48 Mod 0 in accordance with NAVORD LD 162874 and/or LD 162875.
MIL-C-82621 - Cable, Electric, Missile, 54-Conductor
This specification covers the minimum requirements for the procurement of a synthetic rubber-jacketed cable assembly embodying 54 conductors. The cable assembly is used in a missile fire control system.
MIL-C-82622 - Cable, Missile Control, Torpedo Tube, Mk 8 Mod 0 And Mk 9 Mod 0
This specification covers requirements for the procurement of missile control cable assemblies for SUBROC missiles in accordance with NAVSEA LD 162872 and/or LD 162873.
MIL-C-82629 - Cable, Torpedo Control, Type (B), Mk 7 Mods 0, 1, And 2
This specification covers requirements for the procurement of torpedo control cable assemblies, Type "B", in accordance with LD 162531, LD 162533, and DL 2865325.
MIL-C-82630 - Cable, Electric, 65-Conductor
This specification covers requirements for the procurement of synthetic rubber-jacketed cable assemblies embodying 65 conductors. These cables are distinguished by their size, type of insulation, features of construction, and the general conditions of their service use.
MIL-C-82631 - Connector, Cable, Tube Door, Mk 42 Mod 1
This specification states the requirements for the procurement of tube door connector assemblies for submarines in accordance with NAVORD KD 162838.
MIL-C-82632 - Connector Kit, Splice, Single Wire
This specification establishes the minimum requirements for the procurement of a single wire splice connector, DL 5545977. The connector joins the shipboard guidance wire to the torpedo guidance wire and maintains electrical continuity in seawater to a pressure of 1500 psig. The connector will accept wire sizes from AWG 25 to AWG 23 and is of one type and class.
MIL-D-18813 - Depth Setting Mechanism Mark 6 Mod 0
MIL-D-21310 - Doppler Recording Amplifier (For Torpedo Mk 37 Mod 0)
MIL-D-22360 - Device, Hit And Locating
MIL-D-3377 - Diaphragm, Synthetic Rubber
MIL-D-81068 - Device, Hit And Locating (For Torpedo Mk 46 Mod 0)
This specification covers the Hit and Locating Device, BuWeps LD 287489. The Hit and Locating Device is of one class and one type and is referred to herein as "Hit and Locating Device." (See 6.1 for a description of the Hit and Locating Device.)
MIL-E-19278 - Enabler (For Torpedo Mk 39 Mod 1)
MIL-E-19755 - Energizer, Reserve, Mark 21 Mod O
MIL-E-19775 - Enabler (For Torpedo Mark 27 Mod 4)
MIL-E-21058 - Energizer, Reserve, Mark 19 Mod 0
MIL-E-21336 - Exercise Head, Torpedo, Mark 72 Mod 0 (For Torpedo Mark 43 Type)
MIL-E-21403 - Exercise Head Mark 65 Mod 0 For Torpedo Mark 16 Mod 6
MIL-E-21421 - Exploder Mechanism Mark 11 Mod 2 (Inert)
MIL-E-21601 - Exercise Head Mark 78 Mod 0
MIL-E-22017 - Exercise Section (For Torpedo Mark 37 Mod 0)
MIL-E-22403 - Environmental Requirements And Tests (For Torpedo Mk 45 Mods 0 And 1 Components And Assemblies)
MIL-E-22420 - Exercise Head, Torpedo, Mk 80 Mod 0
MIL-E-22421 - Exercise Head Mark 79 Mod 0
MIL-E-22505 - Exercise Head Mark 81 Mod 0 (Fleet)
MIL-E-22911 - Electronic Panel (For Torpedo Mark 37 Mod 2)
This specification establishes the requirements for the procurement of an Electronic Panel, LD 620172, NAVORD Drawing 2618165.
MIL-E-23794 - Exercise Head, Torpedo, Mk 79 Mod 0
MIL-E-82463 - Exercise Head Mark 78 Mod 2
MIL-E-82590 - (
Images) Environmental Requirements And Tests (For Torpedo Mk 37 Components And Assemblies)
This specification establishes the environmental requirements and test procedures for all component parts and assemblies to be used in the Torpedo Mk37. Individual specifications and NAVORD Drawings may reference this specification and invoke its procedures as necessary. However, exceptions may be taken to any section of this document that is not applicable.
MIL-E-82592 - Exercise Head, Impact, Mk 86 Mod 0 (For Torpedo Mk 37 Mods 0, 2, And 3)
MIL-E-82595 - Exercise Head, Torpedo, Mk 80 Mod 1 (For Torpedo Mk 45 Mods 1 And 2)
MIL-E-82638 - Environmental Control Unit Toxicological Agents And Propellants
MIL-F-16905 - Fuel-Flask-Shells (Blanks), Steel (Corrosion-Resisting)
MIL-F-18564 - Flasks, Air, Torpedo (Metallic Arc-Welded)
MIL-F-81079 - Felt, Refractory-Fiber (For Torpedo Mk 46 Mod 0)
MIL-F-81150 - Filter, Bandpass (Navord Dwg 1563728) (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification establishes the requirements for the procurement of a Bandpass Filter, NAVORD Dwg 1563728, which is used in the enabler assembly of an acoustic panel.
MIL-F-81154 - Filter, Lowpass (Navord Dwg 1563732) (For Torpedo Mark 37 Mods O, 2, And 3)
This specification establishes the requirements for the procurement of a Lowpass Filter, NAVORD Drawing 1563732, which is used in the enabler assembly of an acoustic panel.
MIL-F-82561 - Functional Test And Threshold Assembly Ld547036 (For Afterbody Test Set Torpedo Mk 442 Mod 0)
MIL-G-18853 - Gyro, Rate (For Torpedo Mark 37 Mods 2, And 3)
This specification describes the requirements for the procurement, inspection, and test of a rate gyro.
MIL-G-19027 - Gyro, Steering (For Torpedo Mark 37 Mods O, 2, 3)
This specification establishes the requirements for the procurement of a steering gyro, NAVORD LD 620060.
MIL-G-19149 - Gyroscope (For Exercise Head, Torpedo, Mark 57 Mod 0)
MIL-G-19281 - Generator, Tachometer (For Torpedo Mark 39 Mod 1)
MIL-G-19385 - Gyroscope, Anti-Circular Run (For Torpedo Mark 39 Mod 1)
MIL-G-19777 - Gyro Mark 29 Mod 0 (For Torpedo Mark 27 Mod 4)
MIL-G-21311 - Gyroscope, Course Recording, Digital Output (For Torpedo Exercise Heads)
MIL-G-21437 - Gyroscope, Rate (For Torpedo Mk 44 Mod 0 & 1)
MIL-G-21603 - Generator, Alternating Current
MIL-G-22404 - Gyroscope Assembly, Mark 48 Mod 0 (Use Mil-G-82603)
MIL-G-22412 - Gyro Motor Assembly
MIL-G-23266 - Gyroscope, Course Control (For Torpedo Mark 44 Mod 1)
MIL-G-81065 - Gyro-Pendulum Assembly (For Torpedo Mk 46 Mod 0 And Mk 46 Mod 1)
This specification covers one type of Gyro-Pendulum Assembly, Dwg 2089913, for use in a torpedo. The gyro-pendulum assembly is of one type and class and is referred to herein as the gyro-pendulum. (See 6.1 for description.)
MIL-G-82438 - Grain, Igniter, Propellant
This specification covers one type of propellant assembly containing pyrotechnic materials, carbon graphite spacer, and rubber pads.
MIL-G-82603 - Gyroscope Assembly, Mark 48 Mod 1
MIL-H-17007 - Head Shell, Phosphor Bronze Validated Aug 1964
MIL-H-19048 - Head, Exercise, Torpedo, Mk 64 Mod 0 (For Torpedo Mark 37 Mod 0)
MIL-H-21192 - Head, Exercise, Torpedo, Mark 70 Mod 0 For Torpedo Mark 37 Mod 0
MIL-I-19028 - Inverter (For Torpedo Mark 37 Mods O, 2, And 3)
This specification establishes the requirements for the procurement of an inverter, Drawing 1263725, that transforms 26 volt dc battery voltage into regulated 3-phase, 400 Hertz (Hz), ac voltage of 115 volts average of the three line-to-line voltages.
MIL-I-21464 - Indicator, Hit, Sonic (For Acoustic Torpedoes) No S/S Document)
MIL-I-22401 - Inverter
MIL-I-23150 - Indicator, Sonic, Torpedo
MIL-I-82431 - Instrumentation Assembly (For Exercise Head Mk 85 Mod 0, Mod 1, Mod 2, Mod 3, And Mod 4)
This specification covers the requirements for procurement of three types of instrumentation assemblies.
MIL-I-82437 - Igniter
This specification covers one type of igniter used to ignite a solid propellant.
MIL-L-82452 - Logic Assembly (For Exercise Head Mk 85)
This specification covers the requirements for procurement of two types of Logic Assembly (see 6.1.1).
MIL-M-18393 - Motor (For Torpedoes Mark 43 Mod 1, Mark 43 Mod 3, And Exercise Head Mark 57 Mod 0)
MIL-M-19280 - Motor, Direct Current (For Torpedo Mk 39 Mod 1)
MIL-M-19499 - Motor, Direct Current For Mine Vehicle Mark 1 Mod 1
MIL-M-19748 - Motor, Drive, Torpedo
MIL-M-19776 - Motor, Geared Induction (For Torpedo Mark 27 Mod 4)
MIL-M-21002 - Motor (For Torpedo Mark 43 Mod 3)
MIL-M-21422 - Motor, Timing, Chronometrically Governed
MIL-M-21439 - Motor Timing, Direct Current (For Torpedo Mk-44)
MIL-M-21440 - Motor, Steering, Direct Current
MIL-M-21602 - Motor, Propulsion, Direct Current
MIL-M-22413 - Motor, Propulsion
MIL-M-22661 - Motor And Terminals Assembly
MIL-M-23106 - Motor, Heel Trim (For Torpedo Mark 22 Mods 0 And 1)
MIL-M-81082 - Module, Steering Control (For Torpedo Mk 46 Mod 0)
MIL-M-81103 - Motor, Gear Reduced
MIL-M-82433 - Motor, Direct Current (For Torpedo Mk 46 Mod 1)
This specification covers requirements for the procurement of one type of armature-controlled dc motor (see 6.1.2).
MIL-M-82457 - Motor, Steering, Direct Current
MIL-N-82550 - Noise Generator Assembly Ld547072 (For Correlated Noise Generator Test Set Mk 475 Mod 0)
MIL-O-21436 - Oscillograph (S/S By Mil-O-23560)
MIL-O-22406 - Oscillograph (S/S By Mil-O-23560)
MIL-O-23560 - Oscillographs, General Specification For
MIL-O-23560/1 - Oscillograph, Type I (For Torpedo Mark 37 Mod 0)
MIL-O-23560/2 - Oscillograph, Type Ii (For Torpedo Mark 44 Mod 1)
MIL-O-23560/3 - Oscillograph, Type Iii (For Torpedo Mark 45 Mods 0 And 1)
MIL-O-23560/4 - Oscillograph, Type Iv (For Torpedo Mark 37 Mod 1)
This specification covers the detail requirements for the design and procurement of Oscillograph, Type IV, BUWEPS Drawing 2436248.
MIL-O-23560/5 - Oscillograph, Type V (For Torpedo Mark 46 Mod O)
This specification covers the detail requirements for the design and procurement of Oscillograph, Type V, BUWEPS Drawing 2090290.
MIL-O-23560/6 - Oscillograph, Type V1 (For Torpedo Mark 45 Mods O And 1)
MIL-O-81144 - Oscillator Subassembly (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification establishes the requirements for the procurement of an Oscillator Subassembly, Naval Ordnance System Command Drawings 156371, which is used in the enabler assembly of an acoustic panel.
MIL-O-81151 - Oscillator Subassembly (Navord Dwg 1563736) (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification establishes the requirements for the procurement of an Oscillator Subassembly, NAVORD Drawing 1563736, which provides the frequency for the oscillator and amplifier assembly.
MIL-O-81281 - Oscillator, 60 Hz (For Torpedo Mk 37 Mod 2)
MIL-P-18691 - Propeller, Forgings, Alloy Steel (Torpedoes),Use Mil-S-5000
MIL-P-19023 - Pendulum (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification describes the requirements for the procurement, inspection, and test of a pendulum, LD 296723.
MIL-P-19055 - Panel, Component, Recording (For Torpedo Exercise Head Mark 64 Mod 0
MIL-P-19085 - Power Supply, Rectifier (For Torpedo Mark 37 Mod 0 And Mod 1)
MIL-P-19086 - Power Supply, High Voltage (For Torpedo Mark 37 Mods 2 And 3)
This specification describes requirements for the procurement of a high voltage power supply used in the Torpedo Mark 37, Mods 2 and 3.
MIL-P-19209 - Power Supply, Vibrator, Mk 74 Mod 2
MIL-P-19277 - Positioner, Step (For Torpedo Mk 37 Mod 2)
This specification describes the requirements for the procurement of a step positioner, NAVORD Dwg 1521127. The step positioner, as an element of a steering controller, serves to introduce electrical command signals, received from a source external to the steering controller, into a horizontal (azimuth) steering system of a torpedo in accurate increments of two degrees.
MIL-P-19330 - Pendulum (For Torpedo Mark 39 Mod 1)
MIL-P-19575 - Power Supply, 400 Cycle For Torpedo Mark 39 Mod 1
MIL-P-19897 - Panel, Recording (For Torpedo Exercise Head Mk 70 Mod 0)
MIL-P-21441 - Pendulum (S/S By Mil-P-23110)
MIL-P-21460 - Power Unit, For Torpedo Exploder Mk 9 Mod 4 (U)
MIL-P-21695 - Pitch Control Panel Assembly
MIL-P-22405 - Pendulum Assembly
MIL-P-22410 - Panel, Recording
MIL-P-22877 - Pump
MIL-P-22923 - Pitch Control Panel Assembly (Torpedo Mark 44 Mod 1)
MIL-P-23108 - Plug-In Unit For Test Set, Echo Simulator (U)
This specification establishes the requirements for the procurement of a Plug In Unit, Bureau of Naval Weapons LD 512143 which when used with the Main Unit Assembly (Test Set Echo Simulator Mk 315 Mod 1) can provide signals to and monitor the performance of the Torpedo Mk 32 Mod 2 Acoustic Panels. The Unit is of one type and class.
MIL-P-23109 - Panel, Gyro Runout
MIL-P-23110 - Pendulum (For Torpedo Mark 44 Mods 0 And 1)
MIL-P-23793 - Panel, Recording
MIL-P-23810 - Panel, Component, Recording (For Torpedo Exercise Section Mark 64 Mod 2)
This specification describes the requirements for the procurement, inspection, and test of a recording panel, LD 613310.
MIL-P-23858 - Pulse Generator Assembly
MIL-P-81063 - Power Supply (For Torpedo Mk46 Mod 0)
MIL-P-81070 - Pump, Hydraulic, Positive Displacement (For Torpedo Mk 46 Mod 0)
MIL-P-81071 - Pump, Sea Water, Positive Displacement (For Mk 46 Mod 0 Torpedo)
MIL-P-81095 - Propellant, Booster, Grain - Ignition (For Torpedo Mk 46 Mod 0)
MIL-P-82427 - Power Unit (For Torpedo Mk 46 Mod 1)
This specification covers the requirements for the procurement of two types of power units (wee 6.1.2).
MIL-P-82436 - Pump, Fuel
This specification covers one type of swashplate piston-type fuel pump referenced herein as the "pump".
MIL-P-82442 - Pump, Sea Water
This specification covers one type of vane pump referenced herein as the "pump".
MIL-P-82459 - Pressure Transducer (For Torpedo Mk46 Mod O And Mod 1)
This specification covers requirements for the procurement of one type of pressure transducer (see 6.1.2)
MIL-P-82500 - Power Supply, Rectifier (For Torpedo Mark 37 Mods 2 And 3)
This specification describes the requirements for the procurement, inspection, and test of a rectifier power supply, NAVORD LD 162564.
MIL-P-82601 - Pump (Navord Dwg 2521477)
MIL-R-18638 - Ring, Steel, Alloy, Flash Butt Welded (Torpedoes)
MIL-R-19046 - Relay Panel, Firing (For Torpedo Mark 37 Mods O, 2, And 3)
This specification describes the requirements for the procurement, inspection, and testing of Firing Relay Panel, LD 629583.
MIL-R-21159 - Reducer, Pneumatic Pressure For Exercise Head, Mark 65 Mod 0 (Torpedo Mark 16 Mod 6)
MIL-R-21187 - Relay, Sensitive (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification describes the requirements for the procurement, inspection, and test of a double-pole, double-throw, sensitive electromagnetic gate relay of single coil construction, Drawing 815710 or 1155715.
MIL-R-21313 - Recorder, Digital (For Torpedo Exercise Heads)
MIL-R-21407 - Relay, Time Delay (For Torpedo Mark 39 Mod 1)
MIL-R-22193 - Recording Relay Panel (For Torpedo Mark 37 Mod O)
MIL-R-22407 - Receptor, Wire Guidance
MIL-R-22417 - Relay Panel
MIL-R-23811 - Recorder Assembly (For Torpedo Exercise Section Mark 64 Mod 2)
This specification describes the requirements for the manufacture, procurement, inspection and testof a recorder assembly, Bureau of Naval Weapons LD 613309.
MIL-R-81033 - Recorder, Proximity Mark 3 Mod 0
MIL-R-81080 - Radiographic Inspection, Quality Levels For (For Torpedo Mk 46 Mod O)
MIL-R-81158 - Rear Cover Assembled Unit (For Torpedo Mark 37 Mods O And 1)
This specification establishes the requirements for the procurement of a Rear Cover Assembled Unit, Bureau of Naval Weapons LD 620122, which provides the necessary connectors to adapt the acoustic panel to the wiring in the torpedo cabling.
MIL-R-82441 - Regulator Assembly, Carbon Dioxide Pressure
This specification covers one type of carbon dioxide pressure regulator assembly referenced herein as the "regulator".
MIL-R-82507 - Rear Cover (For Torpedo Mark 37 Mod 2 And Mod 3)
This specification establishes the requirements for the procurement of a rear cover, LD 162552, which provides the necessary connectors to adapt the accoustic panel to the wiring in the torpedo cabling.
MIL-S-18533 - Shell Blanks; Steel, High-Tensile (Torpedoes)
This specification covers high-tensile shell blanks fabricated from sheet steel for use in torpedo components.
MIL-S-19364 - Shells, Glass Fiber Reinforced For Torpedoes Mark 43 Mods 1, 2, 3, And 4
MIL-S-19816 - Switch, Sterilizing, Mark 1 Mods O And 1 (For Exploder Mechanism Mark 19 Series)
This specification states the requirements for the procurement of Sterilizing Switch MK 1 Mod 0, a single-pole, single-throw, manually operated electric switch with normally open contacts.
MIL-S-19817 - Switch, Firing, Mark 3 Mods 3 And 4 (Inertia)
MIL-S-19818 - Switch, Firing, Mark 3 Mod 6 (Inertia) (For Exploder Mechanism Mark 11 Series)
This specification states the requirements for the procurement of the Firing Switch Mark 3 Mod. 6, which is an inertia-operated electric switch with normally open contacts, and functions on target impact to complete a firing circuit.
MIL-S-19819 - Switch, Firing, Mark 8 Mod O And 1 (Inertia)(For Exploder Mechanism Mark 19 Series)
This specification states the requirements for the procurement of Firing Switches Mk 8 Mod 0 (LD 291401) and MK 8 Mod 1 (LD 480486), which are inertia-operated electric switches having normally open contacts.
MIL-S-19820 - Switch, Hydrostatic, Mark 24, Mods 0, 1, 2, And 3 (For Exploder Mechanism Mark 19 Series)
This specification states the requirements for the procurement of Hydrostatic Switch MK 24 Mods 0, 1, 2, and 3, which is a single-pole, single-throw, pressure-responsive electric switch with normally closed contacts.
MIL-S-21438 - Switch, Rotary, Solenoid Operated
MIL-S-21458 - Switch, Hydrostatic, Mark 21 Mod 2
MIL-S-22135 - Switch, Firing, Mark 9 Mod O (For Exploder Mechanism Mark 19 Series)
This specification states the requirements for the procurement of Firing Switch Mk 9 Mod 0, LD 161902, an inertia-operated electric switch with normally open contacts which functions on target impact to complete a firing circuit.
MIL-S-22399 - Synchrostepper (For Torpedo Mark 45 Mod 1 And 2)
MIL-S-22408 - Servo Amplifier Assembly
MIL-S-22568 - Stand, Tilt, Torpedo Section
MIL-S-23809 - Section, Exercise, Torpedo, Mark 64 Mod 2 (For Torpedo Mark 37 Mods 2 And 3)
This specification describes the requirements for the manufacture, procurements inspections and test of Exercise Section Mk 64 Mod 2, Ld 547749.
MIL-S-23885 - Switch, Hydrostatic, Mark 72 Mod 0 (For Exploder Mechanism Mark 9 Mod 7)
MIL-S-81031 - Switch, Inertia, Mark 104 Mod 1 (For Torpedomark 46 Mods 0 Thru 5)
This specification covers the requirements for procuring Inertia Switch Mk 104 Mod 0, referred to herein as the "switch".
MIL-S-81054 - Steel, Bars And Forgings, Chromium-Nickel-Molybdenum-Vanadium (For Torpedo Mk 46 Mod 0)
This specification covers chromium-nickel-molybdenum-vanadium steel bars and forgings.
MIL-S-81074 - Squib, Electric, Mark 6 Mod 0 (For Torpedo Mk 46 Mod 0)
MIL-S-81081 - Steel, Sheet, Chromium - Nickel - Molybdenum - Vanadium (For Torpedo Mk 46 Mod 0)
MIL-S-81101 - Switch, Hydrostatic, Mark 109 Mod O
MIL-T-18404 - Torpedoes, Environmental Requirements,
This specification covers the general environmental requirements for the design, development, evaluation and laboratory testing of torpedoes. This specification sets forth the environmental limits within which torpedoes, related component, and associated equipment must operate satisfactorily and reliably. The detailed performance and test requirements for a particular torpedo, particular components, or associated equipment shall be as defined in the detailed specifications.
MIL-T-19029 - Timer (For Torpedo Mark 37 Mods 0 And 3)
This specification establishes the requirements for the procurement of a timer, NAVORD Drawing 877432.
MIL-T-19892 - Test Set, Torpedo, Mark 313 Mod O (For Active And Passive Acoustic Homing Torpedoes)
MIL-T-21151 - Test Set, Underwater Mine, Mark 8 Mod 1
MIL-T-21167 - Torpedo, Mk 39 Mod 1
MIL-T-21693 - Timing Panel Assembly
MIL-T-22393 - Test Set Mark 292 Mod 1
This specification establishes the requirements for the procurement of Test Set Mk 292 Mod 1, LD 291414, which provides a means of checking the functions of Exploder Mk 19 Type.
MIL-T-22419 - Test Set, D.C. Power Supply, Mark 366 Mod 0
MIL-T-22913 - Timer (For Torpedo Mark 37 Mod 2)
This specification establishes the requirements for the procurement of a timer, NAVORD Outline Drawing 2209071.
MIL-T-22922 - Timing Panel Assembly (Torpedo Mk 44 Mod 1)
MIL-T-23270 - Tester, Pressure Monitor, T-3082
MIL-T-23588 - Transducer, Pressure
This specification establishes the requirements for the procurement of a Pressure Transducer, NOVORD Outline Drawing 1803636.
MIL-T-23792 - Test Set, Warhead Simulator, Mark 365, Mod 1
MIL-T-23824 - Torpedo Beacon Light (For Torpedo Mark 37 Mods O, 2, And 3)
This specification establishes the minimum requirements for the procurement of a Torpedo Beacon Light, NAVORD Drawing 695202, which is used in the exercise section of the Torpedo Mk 37 Mods 0. 2, and 3 to aid in the postrun location and recovery of the torpedo at the end of a night-time exercise run.
MIL-T-81066 - Test Set, Guidance Control Torpedo, Mk 443 Mod 0
MIL-T-81067 - Test Set, Exercise Head Torpedo, Mk 441 Mod 0
MIL-T-81148 - Transformer, Discriminator (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification establishes the requirements for the procurement of a Discriminator Transformer, NAVORD Dwg 1563729, which is used in the enabler assembled unit of an acoustic panel.
MIL-T-81206 - Test Set Torpedo Mark 475 Mod 0 (For Torpedo Mk 46 Mod 0)
MIL-T-82560 - Timing Assembly Ld547035 (For Afterbody Test Set Mk 442 Mod 0)
MIL-T-82575 - Test Set, Torpedo, Mark 281 Mod 1
This specification covers the Torpedo Test Set Mk 281 Mod 1, which provides for presetting of all synchronous and nonsynchronous electrical functions of torpedoes. (See 6.1)
MIL-T-82589 - Transducer-Face Diaphragm
MIL-T-82613 - Torpedo Connector Receptacle Assembly
MIL-U-7897 - Unit, Sight Amplifier, Aero-1A
MIL-V-19345 - Valve, Flood (For Mine Vehicle Mk 1 Mods 1 And 2)
MIL-V-19619 - Vacuum-Air-Nitrogen Distribution System
MIL-V-21405 - Valve, Attitude For Exercise Head Mark 65 Mod 0 (Torpedo Mark 16 Mod 6)
MIL-V-22878 - Valve, Regulating
MIL-V-22879 - Voltage Control Unit Assembly (Torpedo Mark 45 Mods 1 And 2)
MIL-V-81072 - Valve, Servo, Electro-Hydraulic, Four Way (For Torpedo Mk 46 Mod 0)
MIL-V-81073 - Valve, Hydraulic, Four Way Electrically Actuated (For Torpedo Mk 46 Mod 0)
MIL-V-82440 - Valve, Fuel Interlock
This specification covers one type of pressure-controlled piston valve referenced herein as the "valve".
MIL-V-82443 - Valve, Fuel Shut-Off
This specification covers one type of fuel shut-off valve referenced herein as the "valve".
MIL-V-82444 - Valve Fuel Tank Pressurization
This specification covers one type of fuel tank pressurization valve referenced herein as the "valve".
MIL-V-82466 - Vacuum-Air-Nitrogen Distribution System
This specification states the requirements for the procurement of a Vacuum-Air-Nitrogen Distribution System, Naval Ordnance Systems Command Drawing 1874091 (LD 6201161), also referred to herein as the "VAND System" or "system".
MIL-W-21690 - Warhead Mark 101 Mod 0
MIL-W-22409 - Warhead Cable Assembly
QPL-17051-2 - Afterbody Shells, Steel, Welded
QPL-3377-3 - Diaphragm Synthetic Rubber
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business