MIL-G-81065A(OS)
NATIONAL BUREAU OF STANDARDS
Screw-Thread Standard for Federal
Handbook H28
Service
(Application for copies should be addressed to the Superintendent of
Documents, Government Printing Office, Washington, D. c. 20360.)
REQUIREMENTS
3.
3.1 Preproduction sample. Unless otherwise specified in the contract
or order, a preproduction sample shall:
(a ) Be manufactured using the procedures proposed for the produc-
tion lot.
(b) Consist of three gyro-pendulum assemblies.
(c ) Be tested as specified in Section 4 herein for the purpose of
determining, prior to starting production, that the supplier's
production methods are capable of yielding items that comply
with the technical requirements of the contract.
3.2 Basic requirements
3.2.1 Materials and treatments of materials and parts. Unless other-
wise specified in the contract or order, all materials and treatments of
materials and parts used in the manufacture of the gyro-pendulum shall
be in accordance with the requirements specified herein and with the
applicable documents listed in Dwg 2089913.
3.2.1.1 Selection of materials. Specifications and standards for all
materials, parts, and Government certification and approval of processes
and equipment, which are not specifically designated herein, and which
are necessary for the execution of this specification, shall be selected
in accordance with MIL-STD-143, except as provided herein. AN, JAN, or
MS Standard parts shall be identified on the drawing by their part
numbers. Commercial utility parts such as screws, bolts, nuts, and
cotter pins may be used, provided they possess suitable properties and
are replaceable by the AN, JAI?, or MS Standard parts without alteration,
and provided the corresponding AN, JAN, or MS Standard part numbers are
referenced on the parts list and, if practicable, on the contractor's
drawings. In the event there is no suitable corresponding standard part
in effect on date of invitation for bids, commercial parts may be used
provided they conform to the requirements specified herein.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business