MIL-O-81151A(OS)
165 vdc.
(b) Current.
The test circuit shall require a current of 6 milli-
amperes (ma).
(c) Voltage, Under a load current of 6 ma, the voltage shall be
150 plus or minus 1 vdc.
(d) Internal impedance. The impedance which the power source pre-
sents to the test circuit at a load current of 6 ma shall not exceed 5
ohms at 1 KHz.
(e) AC Voltage components. Under a load current of 6 ma, the ac
voltage components shall not exceed the following:
(1) 30 Hz to 150 KHZ-------0.2 vrms
(2) 0.9 KHz to 1.1 KH2-----2. O millivolts rms
4,4.3.8 Power source.
The source shall be 115 vrms, 60 Hz, single
phase.
4.4.3.9 Inductor. 4.3 henries plus or minus 1 percent dc resistance 430
ohms plus or minus 5 -percent, Q of 65 minimum and 95 maximum at 4000 Hz
plus or minus 5 percent, distributed capacitance 100 ndcromicrofarad plus
or minus 20 percent.
4.4.3.10 Capacitor. 0.47 microfarad plus or minus 5 percent, 200 V.
4.4.3.11 Capacitor. 0.15 microfarad plus or minus 5 percent, 200 V.
4.4.3.12 Capacitor, 4700 picofarad plus or minus 1 percent, 500 V;
2 required.
2.37 K plus or minus 1/2 percent, 1/2 W.
4.4.3.13
Resistor.
4.4.3.14 Resistor.
38,6 K plus or minus 1/2 percent, 1/2 W: 2 re-
quired.
4.4,3.15 Resistor.
100,000 ohms plus or minus 1 percent, 1/2 W; 2
required.
4.4.3.16 Resistor.
120,000 ohms plus or minus 1 percent, 1/2 W; 2
required.
4,4.3.17 Resistor.
1800 ohms plus or minus 1 percent, 1/2 W.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business