MIL-C-82630(OS)
5.2 Packing
Cable wound on reels requires no further packing.
5.2.1 Reels.
5.2.2 Coils. Cable in coil shall be packed for domestic shipment, if specified in 6.2,
in accordance with MIL-C-915.
5.3 Marking. Each reel and coil of cable shall be marked for shipment in accordance with
MIL-C-915, with the exception that color stripes shall be as follows for the particular year
This color cycle shall repeat itself every fifth year.
of manufacture.
Year of Manufacture
Identifying Color
1975
White
1976
Red
1977
Green
1978
Orange
1979
Blue
6 NOTES
6.1 Intended use. The electric cable described herein forms a part of the torpedo control
cables (LS 162531, LD 162533, LD 162430 and DL2865325). These units complete the fire con-
trol circuit between the torpedo and the fire control console.
6,2 Ordering data.
Procurement
requirements.
6.2.1
(a) Title, number, and date of this specification.
(b) Type cable required and applicable drawings (see 1.2 and 3.3.3),
(c) Preproduction sample length, if other than 100 feet (30 metres). See 4.3.2.1.
(d) Assigned activity for preproduction inspection.
(e) Lot acceptance sample, if different from 4.3.2.2.
(f) Disposition of samples and failures. See 4.4.3.
(g) Packaging and packing required.
6.2.2 Contract data requirements. Items of deliverable data required by this specification
are cited in the following paragraph herein:
Applicable DIDs
Paragraph
Data Requirement
4.4.2
Certified inspection data
DIDs (Data Item Descriptions/DD Forms 1664) for the above requirements will be documented in
the applicable ADL (Authorized Data List). Such data will be delivered as identified on com-
pleted (numbered) DIDs when specified on DD Forms 1423 (Contract Data Requirements Lists) and
incorporated into applicable contracts.
6.3 Metrication. This document has been annotated with the metric equivalents of quanti-
ties not expressed in the International System of Units. The equivalent units are in accor-
dance with ASTM E 380-72 as adopted by the DOD on 29 November 1973, and are included for the
purpose of encouraging metrication. Rather than exact equivalents, the metric quantities
are generally given in rounded amounts within the tolerances specified herein.
Preparing Activity:
Custodian:
Navy - OS
Navy - OS
Project Number:
1355-N354
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business