MIL-C-82630 Cable, Electric, 65-ConductorThis specification covers requirements for the procurement of synthetic rubber-jacketed cable assemblies embodying 65 conductors. These cables are distinguished by their size, type of insulation, features of construction, and the general conditions of their service use.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17

MIL-C-82630(OS)

Temperature:

20 degrees C to 30 degrees C.

(a)

Room ambient to 95 percent.

Relative Humidity:

(b)

Barometric Pressure: 24 to 31 inches of mercury,

(c)

4.4.2 Preproduction inspection and lot acceptance inspection. Preproduction inspection

and lot acceptance inspection shall consist of the examinations and tests shown in Table III

performed on the samples selected under 4.3.2.1 and 4.3.2.2. When specified in the contract

or purchase order, certified inspection data covering the results of preproduction inspections

shall be forwarded to the procuring activity. See 6.2.2.

4.4.3 Failures

4.4.3.1 Preproduction samples. The failure of a preproduction sample to comply with any

provision of this specification shall be cause for denial of production approval. The dis-

position of the sample and proposed corrective action shall be in accordance with the contract

or purchase order. (See 6.2)

4.4.3.2 Lot acceptance sample. The failure of a sample to comply with any provision of this

specification shall be cause for rejection of the lot represented by the sample. The disposi-

tion of the sample and proposed corrective action shall be in accordance with the contract or

purchase order. (See 6.2)

TABLE III

PREPRODUCTION AND LOT ACCEPTANCE INSPECTIONS